BOX WAYS-VERTICAL MACHINING CENTER-AGMACHINE TECHNO CO., LTD.-EZB2B taiwan machine tools ＆ autoparts ＆ plastic mold die

AGMACHINE TECHNO CO., LTD.

886-4-25612868

886-4-25613010

No. 7, Alley 34, Zhuang-Qian Road, Shengang Hsiang, Taichung Hsien, Taiwan 429

www.agma.com.tw

Products

VERTICAL MACHINING CENTER

BOX WAYS

VMC-95/115/116

High-Rigidity Structure

All three axes have a hardened box-way design. In addition, the spindle headstock, column, saddle, base, and table are all made of high-quality Meehanite cast iron.
All slide-ways are heat-treated and precision ground to maintain high precision.
Double guide-ways and a counter-balanced design prevent unexpected vibration from the Z-axis drive, which helps achieve a quality surface finish.
Strategically placed ribs help enhance the spindle headstock structure. The spindle headstock also has the proper proportion of contact with the column, which creates strong spindle support.

Hinged-Belt Chip Conveyor(Option)

This allows for rapid and efficient chip removal during machining in order to maintain a clean machine.

Oil Circulating Cooling System for Spindle

A high efficiency spindle cooling system dissipates running induced heat generation in order to maintain spindle accuracy and prolong spindle life.

Coolant Thru Spindle (C.T.S.)(Option)

THE C.T.S. (COOLANT THROUGH SPINDLE) (A TYPE) system provides 20 bar (280 PSI) of hi-pressure coolant delivery that effectively reduces tool wear because of heat and the slow evacuation of metal chips.

Calibration with laser interferometer is Performed and Certified by PMC

All of our machines are calibrated according to the "VDI 3441 3δ" standard. Calibration is performed for the full travel length of each axis. Each measurement is taken six times to ensure the most consistent and accurate readings.

Enhanced Base Design

The base of the VMC-95/116 has 4-hardened ways that allow for greater stability and accuracy even with heavy loading. In essence, the design fully supports the saddle and table along the entire travel lengths of the X and Y-axes.

24 Tools Magazine

A rapid arm-type tool changer is driven with a precision cam, maintaining toolchanging accuracy of 0.01mm, which in turn will help maintain long-term spindle-clamping accuracy.

Automatic Lubrication System

All AGMA machines use a pressurized central lubricating system. The PLC controlled system allows all three axes to be lubricated evenly to maintain accuracy and prolong machine life.

Double Stoppers Design

To prevent any deviation between the servomotor housing and ball screw bearing housing, each axis is equipped with two stoppers to guarantee absolute axial alignment.

Volumetric Oil Distributor

Lubricating oil is evenly distributed to all the sliding surfaces of the machine via volumetric oil distributors. All stationary lines are made of rigid alloy pipe and hard-plumbed for low maintenance operation over the life of the machine.

Forceful Cleaning Spray-Gun

Equipped on the right front side of base this unit along with the assistance of a high-pressure coolant and air mixture helps increase table cleaning speed.

Specification