21YRS
WU JII INDUSTRY CO., LTD.
886-4-23593510
886-4-23593529
No. 1, 20th Rd., Industrial Park, Taichung City, Taiwan
www.wujii.com.tw

Products

Heat-treatment Information
BÖHLER COLD WORK TOOL STEELS
K105

Properties

High carbon, high chromium (12%Cr) steel with minimum dimensional change. Particularly suitable for air hardening. Good thoughness.

Application

High-duty cutting tools (dies and punches), blanking and punching tools, woodworking tools, shear blades for cutting light-gauge material, thread rolling tools, tools for drawing deep drawing and cold extrusion, pressing tools for the ceramics and pharmaceutical industries, cold rolls (working rolls) for multiple- roll stands, measuring instruments and gauges, small moulds for the plastic industry where excellent wear resistance is required.

Specification

Heat treatment

Hot forming 
forging

1050 to 850°C 
Slow cooling in furnace or thermo insulating material.

Annealing

800 to 850°C 
Slow controlled cooling in furnace at a rate of 10 to 20 °C/ hr down to approx. 600°C, further cooling in air. Hardness after annealing: max. 250 HB

Stress relieving

650 to 700°C 
Slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in complex shapes.  After  through heating, hold in neutral atmosphere for 1-2 hours.

Hardening

980 to 1010°C 
Oil, salt bath (220 to 250°C or 400 to 450°C), air blast, still air. 
Tools of intricate shape or with sharp edges should preferably be hardened in air or salt bath. 
Holding time after temperature equalization:15 to 30 minutes. 
Obtainable hardness: 64-66 HRC

Tempering

Slow heating to tempering temperature immediately after hardening/time in furnace 1 hour for each 20mm of workpiece thickness but at least 2 hours/cooling in air. 
For average hardness figures to be obtained please refer to the tempering chart. 
For certain cases we recommend to reduce tempering temperature and increase holding time.

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.