886-4-25684041
886-4-25670324
No.128, Longshan 1st St., Daya Dist., Taichung City 428, Taiwan
http://www.turret.com.twProducts
Powered Turret Features:
Turret rotation and indexing is driven by a special servo motor.
Tool holders are driven by a spindle motor that features high torque output and no noise.
Fast tool change without change error.
Powered tool holders meet DIN69880 and DIN5480 standards.
Repeatability accuracy reaches 0.003 mm.
Three-piece type curvic clutch ensures high positioning accuracy.
VDI Ø30, 12 tools, tools center Dia. Ø270 mm, Turret center height 80 mm
SERVO TURRET:
Mitsubishi Servomotor: HG-SR102JK ; Gear ratio 1/24
Hydraulic power source: P = 30 kg / cm²
Hydraulic cylinder clamping force 2,500 kg
POWERED TOOL HOLDER:
Tool shank specifications: DIN 5480 W16 x 0.8 and zero detent system.
Max. tool speed: 5,000 rpm.
Spindle motor specification:
Mitsubishi SJ-PF3.7-01 2.2 / 3.7 KW
Fanuc α2 2.2 / 3.7 KW
Siemens 1FT6084-8AK71 / 4.1 KW
Tool and motor transmission gear ratio 1 : 1
Specifications And Accessories
| MODEL | LS-160SP | |
| Center height | mm | 80 |
| Number of tools | N | 8T / 12T |
| Rotating time (tool-to-tool) | sec | 0.42 / 0.4 |
| Rotating time (including locking) | sec | 0.52 / 0.5 |
| Total indexing time for 180° | sec | 0.85 |
| Total indexing time for 180° (including locking) | sec | 0.9 |
| Gear speed ratio | 24:1 | |
| Curvic couplings type | 3 Piece type | |
| Turret servo motor | HG-SR102JK MR-J4-100A-RJ |
|
| Hydraulic working pressure | Kgf/cm² | (25-30)30 |
| Flow rate | L/min. | 20 |
| Thrusting force of hyd. cyl. | Kgf | 2,500 |
| Accuracy of repeatability | mm | 0.003 |
| N.W (Without spindle motor) | Kg | 150 |
| Tool servo motor | MITSUBISHI - SJ-PF3.7-01 FANUC - α2 SIEMENS - 1FT6084-8AK71 |
