886-4-25684041
886-4-25670324
No.128, Longshan 1st St., Daya Dist., Taichung City 428, Taiwan
http://www.turret.com.twProducts
Powered Turret Features:
Turret rotation and indexing is driven by a special servo motor.
Tool holders are driven by a spindle motor that features high torque output and no noise.
Fast tool change without change error.
Powered tool holders meet DIN69880 and DIN5480 standards.
Repeatability accuracy reaches 0.003 mm.
Three-piece type curvic clutch ensures high positioning accuracy.
LS-200SP
VDI Ø40, 12 tools, tools center Dia. Ø340 and Ø370 mm, Turret center height 100 mm
SERVO TURRET:
Mitsubishi Servomotor: HG-SR81JK ; Gear ratio 1/24
Hydraulic power source: P = 40kg / cm²
Hydraulic cylinder clamping force 3,130 kg
POWERED TOOL HOLDER:
Tool shank specifications: DIN 5480 W20 x 0.8 and zero detent system.
Max. tool speed: 5,000 rpm.
Spindle motor specification:
Mitsubishi SJ-PF5.5-01 3.7 / 5.5 KW
Fanuc α3 3.7 / 5.5 KW
Tool and motor transmission gear ratio 1 : 1
LS-250SP
VDI Ø50, 12 tools, tools center Dia. Ø400, Turret center height 125 mm
SERVO TURRET:
Mitsubishi Servomotor: HG-SR81JK ; Gear ratio 1/36
Hydraulic power source: P = 40kg / cm²
Hydraulic cylinder clamping force 6,540 kg
POWERED TOOL HOLDER:
Tool shank specifications: DIN 5480 W24 x 1.25 and zero detent system.
Max. tool speed: 4,000 rpm.
Spindle motor specification:
Mitsubishi SJ-PF7.5-01 5.5 / 7.5 KW
Fanuc α6 5.5 / 7.5 KW
Tool and motor transmission gear ratio 1 : 1
Specifications And Accessories
| MODEL | LS-200SP | LS-250SP | |
| Center height | mm | 100 | 125 |
| Number of tools | N | 8T / 12T | 8T / 12T |
| Rotating time (tool-to-tool) | sec | 0.45 / 0.42 | 0.65 / 0.5 |
| Rotating time (including locking) | sec | 0.55 / 0.52 | 0.82 / 0.67 |
| Total indexing time for 180° | sec | 1.2 | 1.6 |
| Total indexing time for 180° (including locking) |
sec | 1.3 | 1.77 |
| Gear speed ratio | 24:1 | 36:1 | |
| Curvic couplings type | 3 Piece type | 3 Piece type | |
| Turret servo motor | HG-SR81JK MR-J4-100A-RJ |
HG-SR81JK MR-J4-100A-RJ |
|
| Hydraulic working pressure | Kgf/cm² | (35-40)40 | (35-40)40 |
| Flow rate | L/min. | 30 | 40 |
| Thrusting force of hyd. cyl. | Kgf | 3,130 | 6,540 |
| Accuracy of repeatability | mm | 0.003 | 0.003 |
| N.W. | Kg | 240 | 338 |
| Tool servo motor | MITSUBISHI - SJ-PF5.5-01 FANUC - α3 |
MITSUBISHI - SJ-PF7.5-01 FANUC - α6 |
