886-4-25684041
886-4-25670324
No.128, Longshan 1st St., Daya Dist., Taichung City 428, Taiwan
http://www.turret.com.twProducts
Powered Turret Features:
Turret rotation and indexing is driven by a special servo motor.
Tool holders are driven by a spindle motor that features high torque output and no noise.
Fast tool change without change error.
Powered tool holders meet DIN69880 and DIN5480 standards.
Repeatability accuracy reaches 0.003 mm.
Three-piece type curvic clutch ensures high positioning accuracy.
Turret center height 125 mm
SERVO TURRET:
Mitsubishi Servomotor: HG-SR81JK ; Gear ratio 1/36
Hydraulic power source: P = 40 kg / cm²
Hydraulic cylinder clamping force 5,275 kg
POWERED TOOL HOLDER:
Tool shank specifications:
VDI50 DIN5480 W24 x 1.25
BMT 65-ER32 / BMT 75-ER40
Max. tool speed: 3,500 rpm.
Spindle motor specification:
Mitsubishi SJ-PF7.5-01 5.5 / 7.5 KW
Fanuc α6 5.5 / 7.5 KW
Tool and motor transmission gear ratio 1 : 1
Specifications And Accessories
| MODEL | LS-250DTR | |
| Center height | mm | 125 |
| Number of tools | N | 12T / 16T |
| Rotating time (tool-to-tool) | sec | 0.55 / 0.5 |
| Rotating time (including locking) | sec | 0.7 / 0.65 |
| Total indexing time for 180° | sec | 1.67 |
| Total indexing time for 180° (including locking) |
sec | 1.82 |
| Gear speed ratio | 36:1 | |
| Curvic couplings type | 3 Piece type | |
| Turret servo motor | HG-SR81JK MR-J4-100A-RJ |
|
| Hydraulic working pressure | Kgf/cm² | (35~40)40 |
| Flow rate | L/min. | 40 |
| Thrusting force of hyd. cyl. | Kgf | 5,275 |
| Accuracy of repeatability | mm | 0.003 |
| N.W. | Kg | 342 |
| Tool servo motor | Mitsubishi SJ-PF7.5-01 Fanuc α6 |
