L & W MACHINE TOOLS, INC.
886-4-22014701
886-4-22036013
台中市北區大雅路62號9樓之8
www.lw-machinetools.com產品介紹
Standard Accessories:
Spindle speed 4500 rpm (gear box)
Tool magazine capacity 24 tools
Spindle temperature control system
Z-axis lubrication monitoring device
Spindle H/L gear box
Protection of mechanism for three axes
Galvanized telescopic cover for X axis
Centralized automatic lubricating system
Cutting fluid system
Cooling Water nozzle
Y-axis slide way with dust cover
Foot-paddle automatic tool release switch
MPG
Working lamp
Program ending & warning light
RS-232 interface
Screw type chip conveyor
Tool kit
Operation manual
Optional Accessories:
Spindle speed 6000 rpm (Gear box) / 8000 rpm (Pulley type)
Heidenhain optical scale
Tool magazine capacity:32,40,60,120 tools
Manual type angular head
Angular head with air power drawbar
Manual type universal milling head
Link type chip conveyor
CTS system
Auto-tool length measurement system
Auto-workpiece measurement system
Rotary table
Cross rail (W-axis) with NC system
Z-axis travel 800-1000 mm
X-axis Steel roller way
| Description | Unit | CMT-2504 | CMT-2505 | CMT-2506 | CMT-3004 | CMT-3005 | CMT-3006 |
| X-axis travel | mm | 4150 | 5150 | 6150 | 4150 | 5150 | 6150 |
| Y-axis travel | mm | 2800 | 3300 | ||||
| Z-axis travel | mm | 600 (800-1000 Optional) | 600 (800-1000 Optional) | ||||
| Distance from spindle nose to table |
mm | 400-1500 | 400-1800 | ||||
| Distance between columns | mm | 2600 | 3100 | ||||
| Work table size (LxW) | mm | 4000 x 2100 |
5000 x 2100 |
6000 x 2100 |
4000 x 2550 |
5000 x 2550 |
6000 x 2550 |
| T-slot size of worktable | mm | Width 22 x Pitch 210 x 8T | Width 22 x Pitch 210 x 10T | ||||
| Max. worktable load | kg | 13000 | 15000 | 17000 | 17000 | 19000 | 21000 |
| Spindle motor (Cont./30 min) |
HP | 30/25 (35/30 Optional) | 30/25 (35/30 Optional) | ||||
| Spindle speed | rpm | 40-4500 Gear box | 40-4500 Gear box | ||||
| Spindle speed variation |
H / L | H / L | |||||
| Spindle taper | BT 50 (ISO50) | BT 50 (ISO50) | |||||
| Rapid feed rate- X/Y/Z axis (Box Way) |
mm/min | 10000/10000/10000 | 8000/10000/10000 | 8000/10000/10000 | |||
| Cutting feed speed | mm/min | 1-5500 | 1-5500 | ||||
| W-axis motor | HP | AC 5 | AC 5 | ||||
| W-axis motor for NC | KW | 5 (Optional NC system) | 5 (Optional NC system) | ||||
| W-axis ball screw (for NC) | Ø70, P10 (Optional NC system) | Ø80, P10 (Optional NC system) | |||||
| W-axis speed | mm/min | 500 | 500 | ||||
| FANUC-X/Y/Z servo motor | α40,30,30 | α40,30,30 | α40,30,30 | α50,30,30 | |||
| MITSUBISHI-X/Y/Z servo motor | HA 700,300,300 |
HA 300,300,300 |
HA 700,300,300 |
HA 700,300,300 |
HA 700,300,300 |
HA 900,300,300 |
|
| ATC Tool magazine | pcs | 24 std. (32, 40, 60, 120 Optional) | 24 std. (32, 40, 60, 120 Optional) | ||||
| Maximum tool Dia. (All pockets full) | mm | 24 pcs / Ø110, Ø200, 32 pcs / Ø125, Ø250 |
24 pcs / Ø110, Ø200, 32 pcs / Ø125, Ø250 |
||||
| Maximum tool length | mm | 350 | 350 | ||||
| Maximum tool Weight | kg | 15 kg (24T) / 18 kg (32 T) | 15 kg (24T) / 18 kg (32 T) | ||||
| Tool selection | Random tool change system | Random tool change system | |||||
| Tool holder | BT 50 (ISO50) | BT 50 (ISO50) | |||||
| Pull stud | MAS 403 P50T-1 (45°) / DIN 69872 (Optional) |
MAS 403 P50T-1 (45°) / DIN 69872 (Optional) |
|||||
| Tool changing time | sec | 10 | 10 | ||||
| Electrical Power Supply | 60 KVA, AC 220V, 3 phase, 60 Hz |
65 KVA, AC 220V, 3 phase, 60 Hz |
|||||
| Single spindle pressure | kg/cm2 | 5↑ | 5↑ | ||||
| Hydraulic Oil capability | Liter | 300 (5HP pump) | 300 (5HP pump) | ||||
| Lubricator Oil capability | Liter | 20 | 20 | ||||
| Cutting fluid box capacity | Liter | 1000 | 1200 | ||||
| Floor space length | mm | 11742 | 13742 | 15742 | 11742 | 13742 | 15742 |
| Machine WxH | mm | 6582 x 5236 / 5736 (lowest/highest) |
7082 x 3036 / 6536 (lowest/highest) |
||||
| Machine net weight | kg | 46600 | 51800 | 57000 | 55000 | 61000 | 67000 |
| - L&W Machine Tools Inc. reserves the right to alter any mechanical specification without prior notice in the interests of product development. | |||||||
