4YRS
東剛精密機械有限公司
ECOM PRECISION MACHINERY CO., LTD.
ECOM PRECISION MACHINERY CO., LTD.
886-4-7389907
886-4-7382139
彰化市泰和路三段376號
www.ecomcnc.com產品介紹
立式五軸加工中心機
高速立式五軸加工中心機 VX-14i
VX-14i
B軸頭部最大旋轉角度(B軸): +30~-120°。搖擺頭採用高精度滾子凸輪，無背隙，磨耗小，剛性高，最小分割角度為0.001°。蝶式油壓煞車，徑向切削力可達250kgs。
C軸旋轉工作台採用高精度渦輪渦桿設計。工作盤面直徑500mm，最高轉速22.2rpm。最小分割角度為0.001°蝶式油壓煞車。
3+2優點: 可靈活運用，調整至特定切削角度。一次性設定作業，為複查工件之首選機。高品質成功率，大幅縮短切削週期。無需額外設置夾具，即可完成五面切削。降低品質成本，減少重複性製造。
規格數據
Specifications
VX-14i
| Travel | X - Axis Travel | 1400mm | |
|---|---|---|---|
| Y - Axis Travel | 750mm | ||
| Z - Axis Travel | 700mm | ||
| B - Axis Travel | + 30°~ -120° | ||
| C - Axis Travel | 360° | ||
| Spindle Nose To Table(Vertical) | 20-720mm | ||
| Spindle center to table surface(Horizontal) | 260 - 960mm | ||
| Table | Table Size | 1500 X 750mm | |
| T - Slot (number*width*pitch) | 7*18mm*100mm | ||
| Maximum Table Load | 800kg | ||
| B-Axis | Spindle Taper | HSK 63A | |
| Type Of Driving | Built-In Type | ||
| Spindle RPM | 18000rpm | ||
| Indexing Accuracy | 20 sec | ||
| Repeatability | 4 sec | ||
| C-Axis | Table Size | φ500 | |
| Indexing | 0.001° | ||
| Drive method | Worm Drive | ||
| Maximum RPM | 22.2 RPM | ||
| Maximum Table Load | 800kg | ||
| Feed Rate | X. Y. Z Axis Rapid Feed Rate | 30m/min | |
| X. Y. Z Max.Cutting Feed Rate | 10m/min | ||
| Automatic tool changer | Arm Type (Tool to Tool) | 24T (3sec) | |
| Max. Tool Diameter*Length(Adjacent) | Ф150X300mm(Ф78X300mm) | ||
| Max. Tool Weight | 8 kg | ||
| Motors | Siemens | ||
| Spindle Motor (RATED/MAX) | 24 kW | ||
| X. Y. Z Axis Servo Motor | 3.14 kW | ||
| B Axis Servo Motor | 3.14 kW | ||
| C Axis Servo Motor | 3.25 kW | ||
| Machine Accuracy | Positioning Accuracy (JIS) | ± 0.005mm / 300mm | |
| Repeat Poitioning Accuracy (JIS) | ±0.003mm | ||
| Others | Approximate Weight | 11000kg | |
| Floor Space Measurement | 4200*3200*3000mm | ||
Above specification are subject to change without prior notice.
