886-4-24919588
886-4-24915275
No. 225, Jen Hwa Rd., Ta-Li Dist., Taichung City, Taiwan
http://www.aristech.com.twProducts
GENERAL FEATURES:
Machines are designed in compliance with EC MACHINERY DIRECTIVE 89/392/EEC and EN 292 CODES for technical and safety aspects.
Being for COMPACT DESIGN and thus saving space. equipped with 2(or 3) axes DIGITAL READOUT system for easy positioning (optional instrument).
The LSD-25,30,35,65 provide Z-2 axis travel for large mould operating.
Whole dligitize operate panel. And 10 sets of random access of paremeters in memory.
It is able to drill the deep holes on the materials such as stainless steel, hard metal alloy, copper, aluminum, etc.
With diameter from 0.30mm (0.0118") to 3.0mm(0.118").Use clean water for dielectric fluid, and with resing filtering system. Which is unharmful to human body.
STANDARD ACCESSORIES:
1 PC electrode drill chuck ø0.3-ø3.0mm.
1 PC electrode drill guide ø0.1mm.
10 Pcs electrode pipe ø1.0mm.
1 set tool box & kits.
1 unit filter bucker.
OPTIONAL ACCESSORIES:
Digital Read Out & scales.
Electrode guide ø0.2-ø3.0mm(0.1mm per step).
Electrode pipe ø0.2-ø3.0mm(0.1mm per step).
Precision electrode 3-JAW chuck.
Air compressor.
1 unit filter bucker.
| SERIES NO. \ SPECIFIC. | - | LSD-20 | LSD-25 | LSD-30 |
Work table (WxD) | mm/inch | 450x210 | 450x210 | 600x300 |
Work tank (WxD) | mm/inch | 790x490 | 790x490 | 860x560 |
X axis travle | mm/inch | 300(11.8) | 300(11.8) | 350(13.8) |
Y axis travle | mm/inch | 200(7.9) | 200(7.9) | 250(9.8) |
Ram servo travel Z1 Axis | mm/inch | 345(13.6) | 345(13.6) | 345(13.6) |
Work head travel Z2 Axis | mm/inch | 0(0) | 200(7.9) | 200(7.9) |
Hand wheel travel W-Axis | mm/inch | 150(5.9) | 150(5.9) | 150(5.9) |
Max.workpiece weight | kgs/lbs | 100(220) | 300(660) | 300(660) |
Electrode pipe diameter | mm/inch | ø0.2-ø3.0 | ø0.2-ø3.0 | ø0.2-ø3.0 |
The max. heigh of workpiece | mm/inch | 50-200(2-7.9) | 50-400 | 50-400 |
Outside dimension | mm/inch | 1040x1060x2000 | 850x900x1980 | 1040x1140x2100 |
Packing dimension | mm/inch | 1230x1170x2220 | 1110x1305x2230 | 1185x1245x2240 |
Net Weight | kgs/lbs | 750(1650) | 750(1650) | 900(1989) |
SERIESNO. \ SPECIFIC. | - | LSD-35 | LSD-65 |
Work table(WxD) | mm/inch | 600x300 | 700x450 |
Work tank(WxD) | mm/inch | 1030x650 | 1410x740 |
X axis travle | mm/inch | 400(15.7) | 650(25.6) |
Y axis travle | mm/inch | 300(11.8) | 450(17.7) |
Ram servo travel Z1 Axis | mm/inch | - | 345(13.6) |
Workhead travel Z2 Axis | mm/inch | 200(7.9) | 350(13.8) |
Handwheel travel W-Axis | mm/inch | 150(5.9) | 150(5.9) |
Max.workpiece weight | kgs/lbs | 300(660) | 500(1100) |
Electrode pipe diameter | mm/inch | ø0.2-ø3.0 | ø0.2-ø3.0 |
The max. heigh of work piece | mm/inch | 50-400(2-15.8) | 220-720(8.7-28.4) |
Outside dimension | mm/inch | 1200x1200x2050 | 1490x1365x2110 |
Packing dimension | mm/inch | 1560x1340x2252 | 1652x1610x2240 |
Net Weight | kgs/lbs | 900(1980) | 1500(3300) |
POWER SUPPLY UNIT:
SPECIFICATIONS \ SERIES NO. | 30A | |
Nominal current | A | 30 |
Total power input | KVA | 3.5 |
Circuit system | - | Power MOS FET |
Control axis | - | Z AXIS |
Control system | - | 10 steps cutting data |
Display type | - | LED Displayed |
Coordinate system (Positioning commands) | - | - |
Jog speed | - | Manual |
Least input increment | mm/inch | 0.005(0.0002")when |
Outside dimension | mm/inch | 1100x540x850 |
Packing dimension | mm/inch | 1100x540x850 |
Net weight | kgs/lbs | 170(374) |
*Specifications are subject to change without notice.
