886-4-25684041
886-4-25670324
No.128, Longshan 1st St., Daya Dist., Taichung City 428, Taiwan
http://www.turret.com.twProducts
Powered Turret Features:
Turret opposite side 290 mm, 12 tools.
Turret center height 80 mm
Turret rotation and indexing is driven by a special servo motor.
Tool holders are driven by a servo motor that features high torque output and no noise.
Fast tool change without change error.
Repeatability accuracy reaches 0.003 mm.
Three-piece type curvic clutch ensures high positioning accuracy.
SERVO TURRET:
Mitsubishi Servomotor HG-SR102JK ; Gear ratio 1/24
Hydraulic power source: P = 30 kg / cm²
Hydraulic cylinder clamping force 2,350 kg
POWERED TOOL HOLDER:
Tool shank specifications: Ø45-ER25
Max. tool speed: 4,000 mm
Mitsubishi SJ-PF 3.7-01 2.2/3.7 KW
FANUC α2 2.2/3.7 KW
Tool and motor transmission gear ratio 1:1
Specifications And Accessories
| MODEL | LS-160BSP | |
| Center height | mm | 80 |
| Number of tools | N | 12T |
| Rotating time (tool-to-tool) | sec | 0.4 |
| Rotating time (including locking) | sec | 0.5 |
| Total indexing time for 180° | sec | 0.85 |
| Total indexing time for 180° (including locking) | sec | 0.9 |
| Gear speed ratio | 24:1 | |
| Curvic couplings type | 3 Piece type | |
| Turret servo motor | HG-SR102JK MR-J4-100A-RJ |
|
| Hydraulic working pressure | Kgf/cm² | (25~30)30 |
| Flow rate | L/min. | 20 |
| Thrusting force of hyd. cyl. | Kgf | 2,350 |
| Accuracy of repeatability | mm | 0.003 |
| N.W. | Kg | 200 |
| Tool servo motor | MITSUBISHI - SJ-PF3.7-01 FANUC - α2 |
