TE-SHIN CAM CO., LTD.
886-3-3493596
886-3-3493600
No.88, Chajhuan 1st St., Gueishan Township, Taoyuan County 333, Taiwan
www.teshin.com.twProducts
Specification
Specifications
| ITEM | UNIT | RDE80R | |||
|---|---|---|---|---|---|
| Table diameter | mm | 80 | |||
| Center height | mm | 80 | |||
| Center bore | Front spindle hole | mm | 30H7 | ||
| Through hole | mm | 20H7 | |||
| T slot width | mm | N/A | |||
| Guide block width | mm(h7) | 14h7 | |||
| Servo Motor | FANUC | α | αiF2 | □90 | |
| β | βiS2 | □90 | |||
| Mitsubushi | HF-75S | □90 | |||
| Motor interface | Siemens | N/A | N/A | ||
| Gear ratio | -- | 1/24 | |||
| Table max. | r.p.m. | 100 | |||
| Degree mini. | Degree | 0.001 | |||
| Accuracy | Second | 25 | |||
| Forward & Reverse repet.accuracy | Second | 7 | |||
| Allowable cutting torque | 【kgf-m】 | 【5.8】 | |||
| N-m | 57 | ||||
| Clamp system | Pneumatic/ Hydraulic | N/A | |||
| Clamp output at brake | kg-cm² | N/A | |||
| Clamp output torque at brake | 【kgf-m】 | N/A | |||
| N-m | N/A | ||||
| Allowable work weight | (Radial) Straight | kg | 30 | ||
| (Tailstock applied) | kg | 60 | |||
| (Axial) Flat | kg | 60 | |||
| Allowable load (table clamped) |
F | Kgf/N | N/A | ||
| FxL | Kgf/N | N/A | |||
| FxL | Kgf/N | N/A | |||
| Weight | kg | 25 | |||
| Allowable inertia force | kg-m² | 0.2 | |||
Size Drawings
RDE80R
