HONG JI PRECISION MACHINERY LTD.
886-4-23350356
886-4-23356267
No.93, Aly. 146, Ln. 388, Sec.2, Xinan Rd., Wuri Dist., Taichung City 414, Taiwan
www.hong-ji.com.twProducts
Deep Hole Drilling Machine
Knee Type Deep Hole Drilling Machine
PLC ST-1000
We offer economic deep hole drilling machine for customers with different demands. The machine is designed to run under the control of HMI, which requires coolant pump with pressure ranges from 10 to 100 kg/cm². The 600 x 1000mm work table is available to bear 1000kgs during the processing, and the table has three axis on it to make your work even more precise.
Specification
Capacity
- Number of drill spindle: 1 No
- Range of drilling dia.: 3 ~ 25mm
- Max. depth of drilling: 500 / 1,000mm
Speed
- Drill feed range: 10 ~ 500 mm/min
- Spindle speed rangeed: 0 ~ 6,000 rpm
Hydraulic system
- Coolant pump pressure range: 0~100 kg/cm²
- Pump output range: 30 ~ 60 L/min
- Coolant tank capacity: 1000 L
Working table stroke
- Worktable dimensions: 600 x 1,000mm
- Table cross travel(X-Axis): 500mm
- Spindle head vertical travel (Y-Axis): 350mm
- Effective drill stroke (Z-Axis): 500mm / 1,000mm
Drive motor
- Spindle motor: 10hp
- Z-Axis: 1hp
- Y-Axis: 1hp
- X-Axis: 1hp
- Chip screw: 1/8hp
- Coolant pump: 10hp
- Automatic lubrication: 51W
- Total machine power: 25hp
- Max. weight on table: 1,000kgs
- Net weight: 4,500kgs
- Machine dimensions(Approx): 3,200 x 4,500 x 2,300 / 3,200 x 4,000 x 2,300mm
Standard accessories
- Paper filter
- Magnetic separator
- Chip and oil separator system
- High pressure oil pump
- Auto lubrication system
- Protecting drill torsion system
- Outer oil tank/Oil level gauge
- Tranformer
- Leveling screws & block
- Tool box / work light / alarm light
- Mechanical / Electrical operation manual
Special accessories
- Oil cooler
- Coolant oil
- Gundrill
- Guide bush
- Rubber bush
- Automatic Voltage stabilizer
- Fully enclosed guard
- Gundrill grinder
- Safety door interlock
- Oil mist collector
- Filtration housing
- Centrifuge
Features:
- PLC ST-1000 with Mitsubishi PLC and 3-axis is designed for drilling small size molds and irregular components.
- With digital readout (DRO), position of X/Y axis are precisely.
- Servo motor and ball screw are used for the feed mechanism to insure smooth and convenience for feed rate adjust.
- The complete design of oil flow cycle provides plentiful coolant as drilling.
- Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.
- CE requirement is available
- Economy model of Knee-Type Deep-Hole Drilling Machine
Applications:
- Coolant hole for moulds
- Injection hole for plastic moulds
- Automobile parts
- Aerospace parts
- Irregular components
Certificate:
- CE
Order Information:
- Minimum Order: Negotiable
- Branded Product
- FOB: Taiwan Port
